RollCall

RollCall requires entry and exit readers.

  1. Select the Zones menu and click Add.
  2. Enter a name for the Zone and select RollCall.
  3. Click the Doors tab and add the required doors for entry and exit.
  4. If required, click the RollCall tab, select Activate maximum limit and enter the maximum number of persons permitted in the zone.
  5. Select Enable neutralise if you want to reset the RollCall counter at the breakpoint time.
  6. Click Save to close.

Configure the Breakpoint time in Settings > Card/Code > Advanced > Attendance.

Updated 10/10/2022