Install VCN

Offline doors synchronize their behavior settings (e.g. unlocked time and signaling) with VAKA using the SimonsVoss Virtual Card Network tool, hereinafter referred to as VCN.

The VCN tool should be installed on a physical computer with Windows 10 or newer.

  1. Download VCN Tool here .
  2. Navigate to the location where VCN was saved.
  3. Right-click on the saved file and select Run as administrator .
  4. Allow SmartIntego... to make changes to the device where the software is installed.
  5. Select the language for the installation sequence and press OK .
  6. Click Next in the Welcome to InstallShield dialog box.
  7. Review the license agreement.
  8. Make a choice to accept or not.
  9. If you accept the agreement, click Next to continue.
  10. Enter name and organizational affiliation, usually installation company.
  11. Click Next.
  12. Select where to install the VCN and click Next .
  13. Select Complete and click Next .
  14. Click Install .
  15. Choose whether to start VCN or not and click Finish .
  16. In the dialog box to install Baltech USB-to-Virtual... , click Install .
  17. Wait for the installation to complete and click OK .

Continue with creating VCN projects . Read the introduction carefully .

Create desktop shortcut to VCN

  1. In your computer's search function, search for VCN .
  2. Right-click the search result SmartIntego VCN and select Pin to Start Menu .
  3. Open the start menu and locate SmartIntego VCN.
  4. Drag SmartIntego VCN to the desktop.